The manual WiFi installation process for printer

HomeTips & Tricks

The manual WiFi installation process for printer

New printer models provide multi-connection service. Now the user can easily connect his printer to the system. You can use the printer with various d

Financial Astrology: How To Find The Perfect Time For A Big Purchase
8 Superb Ways to Make Fabulous Hairstyle by Using Hairsprays
Need of coaching centres for MBA preparation

New printer models provide multi-connection service. Now the user can easily connect his printer to the system. You can use the printer with various devices. Users can connect the printer either using the cable or Wi-Fi. When you need to take the printout from a distance where you can’t use the cable, go for Wi-Fi installation. It helps the user to take the printout easily.

Connecting printer to PC with a Wi-Fi installation

For connecting the printer to Wi-Fi; you should check certain features. Go and check the access point (router) for a WPS pin. When you see the physical WPS pin then select the WPS method for connecting the printer. Users can connect the printer to the network like other devices. But your printer must support the Wi-Fi connection method.

  • Open the printer and press its Wi-Fi button
  • Now the Wi-Fi lamp of your printer will start flashing
  • Tap the WPS pin on router
  • Check the Wi-Fi lamp of the printer as it will start searching the network
  • When the lamp becomes steady, the printer gets connected to the network
  • Once the printer is connected; you have to check for the network as sometimes the printer gets connected to another network. Users can print the configuration page by pressing the Resume button of the printer until the lamp flashes around fifteen times. Now the printer will give you the printout of your configuration. Take the printout and check the SSID and status. If the connection is correct then you can take the printouts easily.

    Installing the printer driver on your systems

    After connecting the printer to the network; the user should check for the systems. For taking the printouts; you will require the printer driver. Check the devices which are on the same network. Now install the driver for the printer on all devices from which you want to take the printouts. In devices with disc drives, use the CD for driver installation. On other devices, open the browser and search for the printer driver. After driver installation; the Canon mg3600 setup wifi is complete. Now you have to load the pages on your printer and then take your printouts. Now go to a connected device and open a document. Hit the ctrl + P keys and check for the available printer devices. Tap on your printer’s name and now check the printer for printout.

    Manual Printer Wi-Fi connection using the standard method

    When a user can’t opt for a WPS connection as the WPS pin is not available on all routers; go for the standard connection method. With this method, you can connect your printer to the network easily but you will require a PC. The user has to configure the printer to the network with a device that is connected to the same network. After connecting your PC to the network; copy the driver setup.

  • Go to the setup and ta on Run
  • Users will see the Next button
  • Connection method page will appear
  • Tap on Wireless LAN connection
  • Choose Access Point Connection
  • The printer’s Wi-Fi lamp will start blinking
  • The printer software will start searching the printer
  • First time connected printer won’t appear on the list
  • Select on Not found option
  • Tap on the Next button
  • Your printer’s setup guide will start installing
  • Hit on the Next button
  • Now choose the cableless setup and press the Wi-Fi button
    On the computer; tap the Next button
  • The network may get disabled temporarily
  • After the connection; hit on Next button
  • Users will get the location wizard
  • Choose the region and country
  • Now select the language
  • You will get the software installation list
  • Read the license agreement and then hit the Yes button
  • Once your software gets install; hit on Redetect and it will start searching the printer
    You will get the SSID and printer name on the screen
  • Check all the details clearly and then hit on the Complete button.
  • While using the printer for the first time, hit the Execute button and follow on-screen instructions. Select the Exit button once the printer gets configured. Now the user can take the printouts easily from the newly connected device. After connection; keep the printer and network password secured. Using the password on the printer ensures that only authenticated users can access your device.


    DISQUS: 1